Sony SLV-SE100A1, SLV-SE100A2 Operating Instructions Manual page 68

4
Press M/m to select the setting you want to
change or cancel, then press OK.
The selected setting appears in the TIMER
menu.
5
• To change the setting, press </, to highlight the item you want to change,
• To cancel the setting, press CLEAR.
6
Press MENU to exit the menu.
If any settings remain, turn off the VCR to return to recording standby.
When the timer settings overlap
The programme that starts first has priority and the second programme starts
recording only after the first programme has finished. If the programmes start at the
same time, the programme listed first in the menu has priority.
Tip
• In step 6 above, you can check the TIMER LIST by selecting LIST and pressing OK. Press
MENU to exit the TIMER LIST.
68
Checking/changing/cancelling timer settings
then press M/m to reset it.
Programme 1
Programme 2
Programme 1
Programme 2
will be cut off
about 20 seconds will be cut off
TIMER
2 8 . 9
DATE TIME
2 . 1 0 1 0 : 0 0 1 1 : 3 0
SP / LP LP VPS / PDC
LIST
SELECT :
SET :
CANCEL : CLEAR
EXIT :
about 20 seconds
THU
PROG.
CDE
ON
MENU