Showview System - Sony SLV-SE100A1, SLV-SE100A2 Operating Instructions Manual

1
TIMER
PLAY
OK
2
1 2 3
4 5 6
7 8 9
0
CLEAR
3
PLAY
OK
INPUT
SELECT
CLEAR
54
Recording TV programmes using the ShowView system (not available on SLV-SE100A1/A2)
Press TIMER.
• When you set TIMER OPTIONS to
VARIABLE:
The TIMER METHOD menu appears
on the TV screen. Press M/m to select
SHOWVIEW, then press OK.
• When you set TIMER OPTIONS to
SHOWVIEW:
The SHOWVIEW menu appears on the
TV screen.
Press the programme number buttons to
enter the ShowView number.
If you make a mistake, press CLEAR and
re-enter the correct number.
Press OK.
The date, start and stop times, programme
position or station name, tape speed*
2
VPS/PDC setting* appear on the TV
screen.
• If "– –" appears in the "PROG."
(programme) column (this may happen
for local broadcasts), you have to set the
appropriate programme position manually.
Press M/m to select the desired programme position.
To record from a decoder or other source connected to one or more of the
LINE inputs, press INPUT SELECT to display the connected line in the
"PROG." position.
You will only have to do this operation once for the referred channel. The
VCR will then store your setting.
• When you have selected A (Austria), CH (Switzerland), or D (Germany)
with the country selection in the Auto Set Up procedure, the VPS/PDC
function is automatically set to ON.
For details about the VPS/PDC function, see "Timer recording with VPS/
PDC signals (not available on SLV-SE250P and SE450P)" on page 55.
If the information is incorrect, press CLEAR to cancel the setting.
TIMER METHOD
STANDARD
SHOWVIEW
SELECT :
SET : OK
SHOWVIEW
SHOWVIEW NO.
– – – – – – – –
SET : 0–9
SHOWVIEW
SHOWVIEW NO.
1 2 4 6 – – – –
SET : 0–9
CONFIRM : OK
CANCEL : CLEAR
TIMER
DATE
1 , and
TODAY 1 9 : 0 0 2 0 : 0 0
SP / LP SP
LIST
SELECT :
SET :
CANCEL : CLEAR
EXIT : MENU
2 8 . 9 THU
–
EXIT : MENU
2 8 . 9 THU
–
EXIT : MENU
2 8 . 9 THU
TIME PROG.
3 5
VPS / PDC OFF
EXIT : MENU