Sony SLV-SE100A1, SLV-SE100A2 Operating Instructions Manual page 62

Playback options
Play at twice the normal speed*
Play in slow motion
Play frame by frame
Rewind and start play
To resume normal playback
Press H PLAY.
Tip
• Adjust the picture using the TRACKING +/– buttons if:
– Streaks appear while playing in slow motion.
– Bands appear at the top or bottom while pausing.
– The picture shakes while pausing.
To set tracking to the centre position, press both buttons (+/–) at the same time.
Notes
• The sound is muted during these operations.
• In the LP mode*
• If the playback mode mark doesn't appear on the TV screen, press
• The picture may show noise when playing at high speed in reverse.*
1
* not available on SLV-SE100A1/A2 and SE200V1/V2
2
* SLV-SE100A1/A2, SE200V1/V2, SE250D/P, SX250D, and SE300D1/D2 only
62
Playing/searching at various speeds
Operation
1 During playback, press ×2.
During playback, press y SLOW.
During pause, press M
commander. Hold down M
frame each second.
During stop, press H PLAY on the VCR while holding down
m
on the VCR.
1
, noise may appear or there may be no colour.
FF or m
REW on the remote
FF or m
REW to play one
DISPLAY.
2