Table of Contents
Advertisement
Recording TV
programmes
1
2
3
PROGRAM
4
REC
To stop recording
Press x STOP.
To check the remaining tape length
Press DISPLAY on the remote commander. The white bar indicates the
approximate length of tape remaining.
To watch another TV programme while recording
1
If the TV is connected to the VCR using an audio/video cable, set the
TV to TV input. If the TV is connected to the VCR using only the aerial
cable, skip this step.
2
Select another programme position on the TV.
To save a recording
To prevent accidental erasure, break off the safety
tab as illustrated. To record on the tape again,
cover the tab hole with adhesive tape.
8
01GB02CNT-ED818.p65
Turn on your TV and set it to the video channel.
Insert a tape with its safety tab in place.
Press PROGRAM +/– to select the programme position you want to
record.
Press z REC to start recording.
The recording indicator lights up red in the display window.
Recording indicator
8
PROGRAM +/–
z REC
SP
APC
LP
APC
Safety tab
12/3/01, 11:10 AM
Advertisement
Table of Contents
