Sony SLV-ED515PS Operating Instructions Manual page 28

Recording TV programmes using the Easy Timer function
(continued)
3
EASY TIMER
To set the timer and clock setting using the remote commander
You can also use the remote commander to set the Easy Timer and Easy
Clock. The operations on the VCR and the remote commander correspond as
follows:
To
Confirm the setting and go to
the next setting
Change the time by 15 minutes
(in START/STOP mode)
Change the time by one minute
(in START/STOP mode)
Select the programme
Change the hour/minute by
one hour/minute (in CLOCK
mode)
You can also use the programme number buttons to set the clock, start and
stop times, and the programme you want to record. Just press the
programme number buttons to enter the hours and minutes. For example:
• To set the clock to "8:20", press 0, 8, EASY TIMER , 2, 0 and EASY TIMER
in sequence.
• To set the start or stop time to "8:20", press 0, 8, 2, 0 and EASY TIMER in
sequence.
If you make a mistake, re-enter the correct digits before pressing
EASY TIMER .
28
Basic Operations
Push the EASY TIMER knob to finish setting the clock.
The VCR enters the timer recording setting mode.
To continue the Easy Timer
setting, go to step 2 in
"Setting the Easy Timer" on
page 25.
To quit the Easy Timer setting mode without changing any settings,
push the EASY TIMER knob repeatedly until the t indicator
appears in the display window.
Do this on the VCR
Push the EASY TIMER
knob
Turn the EASY TIMER
knob or hold PROGRAM
+/– down
Press PROGRAM +/–
Turn the EASY TIMER
knob or press PROGRAM
+/–
Turn the EASY TIMER
knob or press PROGRAM
+/–
SP START
APC
Do this on the remote
commander
Press EASY TIMER
Hold PROG +/– down
Press PROG +/–
Press PROG +/– or
INPUT SELECT
Press PROG +/–