Items Related To The Audio Control (801 - Sony HDW-F500 Operation Manual

Items Related to the Audio Control (801~)

The values enclosed in a box are the factory settings.
Item number Item
801 AUDIO INPUT
select
ALL-CHANNELS
802 AUDIO INPUT
select
CH-1
803 AUDIO INPUT
select
CH-2
804 AUDIO INPUT
select
CH-3
805 AUDIO INPUT
select
CH-4
806 AUDIO EMPHASIS
807 AUDIO MONITOR-
L select
808 AUDIO MONITOR-
R select
809 DIGITAL JOG
SOUND
811 DIGITAL AUDIO
FADE TIME
Settable range Function
analg Selects the type and channels of the audio input signals.
analg: Audio signals input to the ANALOG AUDIO INPUT
AES/EBU
SDI: Audio signals input to the HD SDI INPUT connectors.
[SDTI]
AES/EBU: Audio signals input to the AUDIO INPUT (AES/
analg
[SDTI] (Only when the optional HKDV-506A SDTI Board is
AES/EBU
[SDTI]
analg
AES/EBU
[SDTI]
analg
AES/EBU
[SDTI]
analg
AES/EBU
[SDTI]
Selects the emphasis mode when recording digital audio
signals converted from analog input audio signals.
on
off: Emphasis is not applied to any of the audio signals.
on: Emphasis is applied to all of the audio signals.
Selects the audio channel output from the AUDIO
MONITOR OUTPUT L connector.
ch2
. . .
ch1, ch2, ch3, ch4, cue
ch1 Selects the audio channel output from the AUDIO
MONITOR OUTPUT R connector.
. . .
ch1, ch2, ch3, ch4, cue
off Switches digital jog sound on and off.
off: Digital jog sound is switched off.
on: Digital jog sound is switched on.
5 ms Specifies the fade processing time during cross-fading or
fading-in/out of digital audio signals.
15 ms
Note
20 ms
Processing for cross fading, fading-in, and fading-out starts
25 ms a)
after an IN or OUT point. This item specifies rewriting
b)
50 ms
during recording following the OUT point. Rewriting of one
85 ms
field occurs even when the minimum setting (5 ms) is
c)
115 ms
selected. When "cut edit" is selected in item 317 to prevent
this from happening, a discontinuity in the audio signal
occurs. There is, however, no effect on the recording of the
video signal.
a) The cross fade time is 24 ms.
b) The actual fade time is 49 ms.
c) The actual fade time is 114 ms.
connectors.
EBU) connectors.
installed.): If "SDTI" is selected in item 701., the SDTI
audio signal input to the SDTI (OPTION) IN connector is
automatically selected and AUDIO INPUT/MONITOR
SELECT buttons on the upper control panel become
unlit and another input selection cannot be made.
In this case, the sound for channels for which speed
correction processing is not being carried out is output,
even in the case of "STILL."
A-59
Appendix