Sony GV-HD700 Operating Manual page 51

To (USB)
jack
One of the images stored on the
"Memory Stick Duo" will be displayed.
Printing
1
Select the image you want to print
using VOLUME/MEMORY (–/+).
2
Set the number of copies you
want to print if necessary.
If you do not want to set the number, go
to step 3 (the number will be
automatically set to 1).
1 Select [SET] t [COPIES], then press
EXEC.
To USB
jack
USB cable
(supplied)
2 Select the number using V/v, then press
EXEC.
You can set the number up to 20.
3 Select [ RETURN], then press
EXEC.
3
Set the printing date/time on the
image if necessary.
If you do not want to print the date/time,
go to step 4.
1 Select [SET] t [DATE/TIME] t
[DATE] or [DAY & TIME], then press
EXEC.
2 Select [ RETURN], then press
EXEC.
4
Select [EXEC] t [YES], then
press EXEC.
When printing is finished, [Printing...]
disappears and the image selection
screen appears again.
Press MENU when printing is
completed.
b Notes
• We can guarantee the operation of only models
that are PictBridge compatible.
• Refer also to the operating instructions for the
printer to be used.
• Do not attempt the following operations when
the printer is connected (
The operations may not be performed properly.
– Set the POWER switch to OFF (CHG).
– Disconnect the USB cable from the VCR or
the printer.
– Eject the "Memory Stick Duo" from the VCR.
• If the printer stops working, disconnect the USB
cable, turn the printer off and on again and
restart the operation from the beginning.
is on the screen).
51
Continued ,