Sony GV-D200 Operating Instructions (primary manual) Operating Instructions Manual page 52

Changing the menu settings
Icon/item
AUDIO MIX
PB MODE
A/V t DV OUT
Notes on AUDIO MIX
• You can adjust the balance only for tapes recorded in the Digital8
• When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance.
Note on PB MODE
The mode will return to the default setting when
– you remove the battery pack or power source.
– you turn the POWER switch to OFF.
52
Mode
—––
z AUTO
/
z OFF
ON
Meaning
To adjust the balance between the stereo 1 and stereo 2
ST1
To automatically select the system (Hi8/standard 8 or
Digital8 ) that was used to record on the tape, and play
back the tape
To play back a tape that was recorded in the Hi8/
standard 8 system when your VCR does not
automatically distinguish the recording system
To convert digital video signals into analog video signals
via your VCR
To convert analog video signals into digital video siginals
via your VCR
ST2
system.