Step 3 Inserting A Cassette - Sony GV-D200 Operating Instructions (primary manual) Operating Instructions Manual

Step 3 Inserting a cassette

We recommend using Hi8
(1) Prepare the power supply (p. 8-11).
(2) While pressing the small blue button, slide EJECT in the direction of the arrow.
(3) Insert a cassette with the window facing up.
(4) Close the cassette compartment by pressing the
To eject a cassette
Follow the procedure above, and eject the cassette in step 3.
Notes
•Do not insert your fingers or touch inside of the cassette compartment with your
fingers when it is open. It may cause your VCR to malfunction.
•Your VCR records pictures in the Digital8
•The recording time when you use your VCR is half of indicated time on Hi8
tape. If you select the LP mode in the menu settings, 3/4 of indicated time on Hi8
•If you use standard 8
pattern noise may appear when you play back standard 8
To prevent accidental erasure
Slide the write-protect tab on the cassette to expose the red mark.
12
The cassette compartment automatically lifts up and opens.
compartment.
2
EJECT
tape.
/Digital8 video cassettes.
3
system.
tape, be sure to play back the tape on your VCR. Mosaic
mark on the cassette
4
tape on other VCRs.