Sony UP-D2600S Service Manual page 92

NG command NG data Contents of NG
h' E1 h' 51 LOAD_TMG_TIMEOUT
h' 52 LOAD_TNG_FGOUT
h' 53 LOAD_PAPER_TIMEOUT1
h' 54 LOAD_PAPER_TIMEOUT2
h' 58 EJECT_TMG_TIMEOUT
h' 61 CHUCK_ERROR
h' 62 PP_JAM_ERROR
NG Command List 2
A way of looking the list: In case of h ' 0A = 0000 1010 (Refer to HEX code converting as binary code.)
NG sensor is the first bit (PLT_CV) and third bit (PP_SIZE sensor)
NG _CODE2
NG command NG bit Contents of NG
h' E2 bit 6 LOAD_TMG sensor
bit 5 EJCT_TMG sensor
bit 4 RBN_CST sensor
bit 3 PP_SIZE sensor
bit 2 PAPER sensor
bit 1 PLT_CV sensor
bit 0 KICK_OUT sensor
NG_CODE3
NG command NG bit Contents of NG
h' E4 bit 6 Head thermistor
bit 5 Head thermistor
bit 4 Room thermistor
bit 3 Room thermistor
bit 2
bit 1 EEPROM ERROR
bit 0 EEPROM ERROR
3-18
Board/REF Check item
SE-427 board/PH501 . Connector is disconnected.
SU-39 board . Motor / sensor are defective.
. There is no sensor sensitive by mistaken
assembling the mechanism
. Connector is disconnected, and parts are
SE-428 board/PH550
defective.
. There is no sensor sensitive by mistaken
assembling the mechanism
SE-422 board/PH250 . Connector is disconnected, and parts are
defective.
. There is no sensor sensitive by mistaken
assembling the mechanism
Board/REF Check item
SE-427 board/PH501 . Connector is disconnected.
SE-428 board/PH550 . Parts are defective.
. The sensor becomes ON by mistaken
Pushbutton SW
SE-426 board/PH450 assembling the mechanism.
SE-426 board/PH451
SE-419 board/S150
SE-430 board
Board/REF Check item
Thermal head . Connector is disconnected.
. Thermal head
PRT-11 board/TH1 . Parts are defective.
. Connector is disconnected.
SE-417 board/IC1
. Parts are defective.
UP-D2600/V1(E)