Sony UP-D2600S Service Manual page 91

NG Command List 1
A way of looking the list: Refer to the displayed NG data.
In case of h ' 19 , it becomes HEAD_FF2 FF1 TIMEOUT.
NG_CODE1
NG command NG data Contents of NG
h' E1 h' 11 HEAD_HOME_TIMEOUT
h' 12 HEAD_PRN_FF2_TIMEOUT
h' 13
h' 14 HEAD_TRAY_TIMEOUT
h' 15 HEAD_FF_PRN_TIMEOUT
h' 16 HEAD_HOME_FF1_TIMEOUT
h' 17 HEAD_HOME_FF2_TIMEOUT
h' 18 HEAD_FF_HOME_TIMEOUT
h' 19 HEAD_FF2_FF1_TIMEOUT
h' 1a
h' 1b HEAD_FF1_TIMEOUT
h' 21 TRAY_HOME_LOAD_TIMEOUT1 SE-429 board/PH601
h' 22 TRAY_HOME_LOAD_TIMEOUT2 SE-429 board/PH602
h' 23 TRAY_HOME_OUT_TIMEOUT
h' 24 TRAY_OUT_HOME_TIMEOUT
h' 25 TRAY_LOAD_HOME_TIMEOUT
h' 26 TRAY_LOAD_HOME_TIMEOUT
h' 2a TRAY_PAPER_OUT_TIMEOUT
h' 2b TRAY_PAPER_IN_TIMEOUT
h' 33 RIBBON_Y_TIMEOUT
h' 34 RIBBON_MCL_TIMEOUT
h' 38 BARCODE_START_ERROR
h' 39 BARCODE_BIT_ERROR
h' 41 PLT_HOME_TIMEOUT
h' 42 OLT_HOME_ERROR
UP-D2600/V1(E)
Board/REF Check item
SE-420 board/PH201 . Connector is disconnected.
. Motor / sensor are defective.
SE-420 board/PH202
. There is no sensor sensitive by mistaken
SU-36 board
assembling the mechanism.
. Connector is disconnected.
. Motor / sensor are defective.
SU-38 board . There is no sensor sensitive by mistaken
assembling the mechanism.
SE-423 board/D301, D302 . Connector is disconnected.
SE-424 board/Q350, Q351 . Motor / sensor are defective.
. There is no sensor sensitive by mistaken
assembling the mechanism
SE-425 board/PH401 . Connector is disconnected.
. Motor / sensor are defective.
. There is no sensor sensitive by mistaken
assembling the mechanism
SE-419 board/PH150 . Connector is disconnected.
PLT_MTR . Motor / sensor are defective.
. There is no sensor sensitive by mistaken
assembling the mechanism
3-17