Sony DVCAM DSR-30P Operating Instructions Manual page 56

Troubleshooting (continued)
Symptom
The remote commander does not
Remote
function.
commander
When operating this VCR with
the supplied remote
commander, other Sony video
equipment as well as this VCR
start operation.
EN
56
Additional Information
Remedy
• The batteries are weak. Replace all the batteries with new ones.
• No batteries are inserted in the battery compartment.
• Turn on the power of the main unit.
• Make sure you are pointing the remote commander at the remote
sensor on the VCR.
• Select the same COMMAND MODE on the VCR and the remote
commander.
• The COMMAND MODE selector on the unit is set to "OFF."
• COMMAND MODE selectors of this VCR and other Sony video
equipment are set to the same number. Change the setting of the
COMMAND MODE selector on this VCR.