Playing A Cd - Sony MXD-D5C Operating Instructions Manual

Basic Operations Basic Operations

Playing a CD

2
PHONE LEVEL
Connect the headphones.
Adjust the headphone volume.
When using the controls on the
deck
Use the CD player controls located
to the left of the front panel.
When using the remote Z
Set SELECT to CD.
Audio output
Output switches automatically to
the audio of the CD.
z
You can start playing with
the track selected in Step 4
1 Turn AMS (or press = or
+) to select the track you
want to play using the
display*.
2 Press AMS or ·.
* See "Using the Display" on
page 12.
z
You can remove and load
CDs while playing another
CD
Press any DISC 1 – 5 § other
than the CD that is currently
playing to open that tray, and
remove or load the CD.
6
3
DISC 1 DISC 2 DISC 3 DISC 4
STANDBY
PLAY MODE
AMS
CD
MIN MAX
TIME
PHONES
REC-IT
CLEAR DISPLAY
PUSH ENTER
4 3
1
Turn on the amplifier and set the source selector to the position
for this deck.
2
Press 1/u.
The STANDBY indicator turns off.
3
Press any DISC 1 – 5 § and place a CD on the disc tray. Press
the button again to close the CD tray.
When you play an 8-cm CD, place it on the inner circle of the
tray.
4
Press ·.
The deck starts playing. Adjust the volume on the amplifier.
To
Stop playing
Pause playing
Go to the next track
Go to the beginning of the
current track or the
preceding track
Take out the CD
DISC 5
CD SYNCHRO
NORMAL
HIGH
MENU/ NO
CLEAR
With the label side up
Do the following:
Press p.
Press P. Press the button again or press · to
resume playing.
Turn AMS clockwise (or press + on the
remote).
Turn AMS counterclockwise (or press = on the
remote).
Press one of DISC 1 – 5 § to open the tray that
contains the CD you want to remove after
stopping playing.
MD LP
EJECT
REC MODE
YES
AMS
MD
PLAY MODE SLEEP
REC TIME/CHAR INPUT
PUSH ENTER