Sony MXD-D5C Operating Instructions Manual page 34

Editing Recorded MDs
5
Press AMS or YES.
A flashing cursor appears in the display.
The deck starts playing and you can name a track
while monitoring the sound.
6
Press TIME/CHAR to select the character type as
follows:
To select
Uppercase letters
Lowercase letters
Numbers
Symbols
7
Turn AMS to select the character.
The selected character flashes.
Letters, numbers, symbols, and a space appear in
sequential order as you turn AMS.
You can use the following symbols in titles:
' – / , . ( ) : ! ? & + < > _ = " ; # $ % @
You can press TIME/CHAR to change the
character type at any time during Step 7 (see Step 6
above).
8
Press AMS to enter the selected character.
The selected character stops flashing and the
cursor flashes waiting for the input of the next
character.
34
Press TIME/CHAR repeatedly until
"A" appears in the display
"a" appears in the display
"0" appears in the display
" ' " appears in the display
`
9
Repeat Steps 7 and 8 until you have entered the
entire title.
If you entered the wrong character
Press 0 or ) until the character to be corrected
starts flashing, and repeat Steps 7 and 8 to enter
the correct character.
To erase a character
Press 0 or ) until the character to be erased
starts flashing, then press CLEAR.
To enter a space*
Press AMS while the cursor is flashing.
* You cannot select a space for the first character of the
title.
10
Press YES.
To cancel labeling
Press MENU/NO or p.
Note
You cannot label a track or an MD while you are recording
over an existing track.