Setting The Speakers; Speaker Setup - Sony MHC-WZ88D Operating Instructions Manual

x PAUSE MODE (DVD VIDEO and DVD-RW
in VR (Video Recording) mode only)
Select the picture in pause mode.
AUTO
FRAME
x TRACK SELECTION (DVD VIDEO only)
Gives priority to the sound track which contains
the highest number of channels when you play
back a DVD VIDEO on which multiple audio
formats (PCM, DTS, MPEG audio, or Dolby
Digital format) are recorded.
OFF
AUTO
Notes
• When you set "TRACK SELECTION" to "AUTO",
the language may change. The "TRACK
SELECTION" setting has higher priority than the
"AUDIO" settings in "LANGUAGE SETUP"
(page 51). However, depending on the disc, this
function cannot be performed.
• If PCM, DTS, Dolby Digital, and MPEG audio sound
tracks have the same number of channels, the system
selects PCM, DTS, Dolby Digital, and MPEG audio
sound tracks in this order.
x MULTI-DISC RESUME (DVD VIDEO and
VIDEO CD only)
Turns on and off the Multi-Disc Resume. The
resume playback point can be stored in the
system for up to 40 different DVD VIDEOs and
VIDEO CDs (page 20).
ON
OFF
GB
54
The picture, including subjects
that move dynamically, is output
with no jitter. Normally select this
position.
The picture, including subjects
that do not move dynamically, is
output in high resolution.
No priority given.
Priority given.
Stores the resume playback point
in the system for up to 40 discs.
Does not store the resume
playback point in the system.
Playback starts at the resume
playback point only for the current
disc in the system.
x AUDIO DRC (Dynamic Range
Compression) (DVD VIDEO and DVD-RW
in VR mode only)
Narrows the dynamic range of the sound track.
Useful for watching movies at low volume late
at night.
OFF
No compression of dynamic
range.
STANDARD
Reproduces the sound track with
the kind of dynamic range that the
recording engineer intended.
MAX
Narrows the dynamic range fully.
Note
AUDIO DRC can only be performed with Dolby
Digital sources.
x DivX (Except for Latin American models)
Display the registration code for this system.
For more information, go to
http://www.divx.com on the Internet.

Setting the speakers

— SPEAKER SETUP

To obtain the best possible surround sound, set
for the size of the speakers you have connected
and their distance from your listening position.
Then use the test tone to adjust the level of the
speakers to the same level.
Select "SPEAKER SETUP" in the Setup menu.
For details, see "Using the DVD setup menu"
(page 50).
The default settings are underlined.
SPEAKER SETUP
SIZE:
DISTANCE:
LEVEL(FRONT):
LEVEL(SURROUND):
TEST TONE:
FRONT:
CENTER:
SURROUND:
SUBWOOFER:
OFF
YES
YES
BEHIND
YES