Using The Theatre Sync Function - Sony MHC-WZ88D Operating Instructions Manual

Using the THEATRE SYNC
function
THEATRE SYNC allows you to turn on your
Sony TV and this system, changes the system's
function to "DVD," and then swiches the TV's
input source you have set with just one button.
Preparing for the THEATRE
SYNC function
Hold down SLEEP and press the numeric
buttons, CLEAR or ALBUM +/– to register
the TV's input source.
The TV's input source is selected.
For details, refer to the following table.
Hold down SLEEP
and press
0
1
2
3
4
5
6
7
8
9*
CLEAR*
ALBUM –*
ALBUM +*
* Except for North American models.
GB
16
To select the following
TV's input source
No input source
(Default)
VIDEO 1
VIDEO 2
VIDEO 3
VIDEO 4
VIDEO 5
VIDEO 6
VIDEO 7
VIDEO 8
COMPONENT 1
COMPONENT 2
COMPONENT 3
COMPONENT 4
Operating the THEATRE SYNC
function
Point the remote to the direction of the TV
and this system, then press THEATER
SYNC once.
If this function does not work, change the
transmission time. The transmission time varies
depending on the TV.
To change the transmission time
Hold down > and press the numeric
buttons to change the transmission time.
The transmission time from the remote is
selected. For details, refer to the following table.
Hold down > and
press
1
2
3
4
5
6
7
8
Notes
• This function can only be performed with Sony TV
series.
• If the distance between the TV and this system is too
far, this function may not work. Install the system
near the TV.
• Keep the remote pointed in the direction of the TV
until the TV is turned on and the input source is
changed correctly.
To select the following
transmission time
0.5 (Default)
1
1.5
2
2.5
3
3.5
4