Sony MHC-WZ88D Operating Instructions Manual page 10

Speakers
Black (#)
Black (#)
3 Connect the FM and AM antennas.
Set up the AM loop antenna, then connect
it.
AM loop antenna
Extend the FM lead antenna horizontally
4 Connect the video input jack of your
TV to the VIDEO OUT jack with the
supplied video cord.
GB
10
Red (3)
Red (3)
VIDEO OUT
When using a TV
Turn on the TV and select the video input so that
you can view the pictures from this system.
When connecting a video deck
Connect the video deck to the TV using a video
cord (not supplied). However, do not connect
this system to the TV through the video deck.
Otherwise, you may experience video leakage
when watching video images from this system.
Connect this system directly to the TV as shown
below.
Video deck
Do not connect
directly
Tip
For higher quality video images:
– Use the optional component video cords to connect
the COMPONENT VIDEO input jacks on your TV
to the COMPONENT VIDEO OUT jacks of this
unit. If your TV is compatible with progressive
format file signals, use this connection and press
PROGRESSIVE on the unit repeatedly until
"P AUTO" or "P VIDEO" appears in the display.
– You can use an optional S Video cord to connect the
S VIDEO input jack on your TV to the S VIDEO
OUT jack of this unit.
5 For models equipped with a voltage
selector, set VOLTAGE SELECTOR to
the position of your local power line
voltage.
Depending on the model, the VOLTAGE
SELECTOR may differ.
* Saudi Arabian model : 120 - 127V
TV
System