Recording Onto A Tape (Cd Synchro Recording/Manual Recording); Start Recording - Sony MHC-RG295 Operating Instructions Manual

Recording onto a tape
(CD Synchro recording/Manual
recording)
You can record on a TYPE I (normal) tape in
two ways:
CD Synchro Recording:
You can record an entire CD onto a tape.
Manual Recording:
You can record just the portions you like from
a sound source, including connected audio
components.
Use buttons on the unit to control tape
recording.
1
Load a recordable tape into deck
B with the side you want to record
facing forward, and then press
TAPE A/B
TAPE B.
2
Prepare the recording source.
For CD Synchro Recording:

Press CD
Load the disc you want to record, and press
DISC SKIP
disc.
When recording a folder from an MP3
disc, press PLAY MODE
repeatedly to select "

+/–
folder.
To record only your favorite CD tracks or
MP3 files in your desired order, perform
steps 2 to 6 of "Creating your own CD
program" (page 16).
For Manual Recording:
Select the desired source to record.
18
GB

repeatedly to select
to select the CD function.

repeatedly to select the

on the remote
," and then press
repeatedly to select the desired
3
Set deck B to stand by for
recording.
For CD Synchro Recording:

Press CD SYNC
For Manual Recording:
Press REC PAUSE/START
4

Start recording.

While recording, you cannot listen to other
sources.
For CD Synchro Recording:
Press REC PAUSE/START
recording is completed, the CD player and
the tape deck stop automatically.
For Manual Recording:
Press REC PAUSE/START
start playing the desired recording source.
If there is noise while recording from the
tuner, reposition the appropriate antenna to
reduce the noise.
To stop recording
Press  
.
Notes
• Recording stops if you change to a different function.
• You cannot eject the disc during CD Synchro
Recording.
.

.

. When the

, and then