Tuner; Presetting Radio Stations - Sony MHC-GSX100W, MHC-GSX75 Operating Instructions Manual

Tuner

Presetting radio stations

You can preset up to 20 FM stations and 10 AM
stations. You can then tune in any of those
stations simply by selecting the corresponding
preset number.
Automatic tuning preset
You can automatically tune in all of the stations
that can be received in your area and then store
the radio frequency of the desired stations.
1
Press TUNER/BAND repeatedly to
select "FM" or "AM".
2
Press and hold TUNING – or + until the
frequency indication starts to change,
then release it.
"AUTO" appears in the display.
Scanning stops automatically when a
station is tuned in. At that time, "TUNED"
and "ST" (for stereo program only) appear.
If "TUNED" does not appear and the
scanning does not stop
Set the frequency of the desired radio
station as described in steps 2 and 3 of
"Manual tuning preset" (page 19).
3
Press MENU.
4
Press PRESET – or + repeatedly until
"MEMORY" appears, then press
ENTER.
The preset number flashes.
5
Press PRESET – or + repeatedly to
select the desired preset number.
6
Press ENTER.
7
Repeat steps 1 through 6 to preset
other stations.
Preset number
Manual tuning preset
You can manually tune in and store the radio
frequency of the desired stations.
1
Press TUNER/BAND repeatedly to
select "FM" or "AM".
2
Press TUNING – or + repeatedly to tune
in the desired station.
3
Press MENU.
4
Press PRESET – or + repeatedly until
"MEMORY" appears, then press
ENTER.
The preset number flashes.
5
Press PRESET – or + repeatedly to
select the desired preset number.
6
Press ENTER.
7
Repeat steps 1 through 6 to preset
other stations.
Other Operations
To Do this
Tune in a station Follow the procedure described
with a weak signal in "Manual tuning preset"
(page 19).
Stop setting presets Press MENU.
Set another station After step 4, press . or >
to the existing repeatedly to select the preset
preset number number you want to store the
station.
To change the AM tuning interval
The AM tuning interval is factory-preset to 9
kHz (or 10 kHz for some areas). To change the
AM tuning interval, tune in any AM station first,
then turn off the system. While holding down
ENTER on the unit, turn the system back on.
When you change the interval, all the AM preset
stations are erased. To reset the interval, repeat
the same procedure.
continued
GB
19