Sony MHC-GSX100W, MHC-GSX75 Operating Instructions Manual page 18

8
Repeat steps 6 and 7 to complete the
entire title.
If you make a mistake
Press m or M until the character you
want to change flashes, then repeat steps 6
and 7.
To erase a character
Press CLEAR while the character is
flashing. You cannot insert characters.
9
Press ENTER to complete the labeling
procedure.
To cancel labeling
Press MENU.
Note
The Disc Memo stores the number of the slot in which
the disc was loaded. Re-enter the Disc Memo when
loading a new disc into that slot.
Tip
When you replace a disc with a CD-TEXT disc, the
disc title of the CD-TEXT disc is automatically
restored. The Disc Memo of the CD-TEXT disc is no
longer stored (disappears) when the disc is removed.
Checking the Disc Memos
1
Press CD to switch the function to CD.
2
Press MENU.
3
Press . or > repeatedly until
"NAME CHECK" appears, then press
ENTER.
4
Turn DISC SELECT on the unit to select
the Disc Memos stored in the system
memory between 01 and 60, then press
MENU.
To check the current Disc Memo
Press DISPLAY repeatedly until the Disc Memo
appears in stop mode.
GB
18
Erasing a Disc Memo
1
Press CD to switch the function to CD.
If "SHUF" or "PGM" appears, press PLAY
MODE repeatedly until both disappear.
2
Press MENU.
3
Press . or > repeatedly until
"NAME ERASE" appears, then press
ENTER.
4
Turn DISC SELECT on the unit to select
the disc number with the Disc Memo
you want to erase, then press ENTER.
Erasing all Disc Memos of all
discs
1
Press CD to switch the function to CD.
If "SHUF" or "PGM" appears, press PLAY
MODE repeatedly until both disappear.
2
Press MENU.
3
Press . or > repeatedly until
"ALL ERASE" appears, then press
ENTER.
4
Press ENTER again until "COMPLETE"
appears.