Display Functions - Miele PG 8130 U Operating Instructions Manual

Guide to the machine

Display functions

General information
The display is used to select or set the
following:
– The program
– The FlexiTimer (Delay start)
– The Settings menu
The display can show the following:
– The current time of day
– The program stage
– The estimated time left for the
program to run
– Any relevant fault messages and
information
To save energy, the dishwasher
switches off after a few minutes if you
do not press any buttons during this
time.
Press the  button to switch the
dishwasher back on.
8
Settings menu
The Settings menu is used to change
different configurations within the
dishwasher. The Settings menu is
accessed by pressing the  button.
The arrows on the display indicate that
further options are available for
selection. You can use the  arrow
buttons next to the display to select
further options as appropriate.
The OK button is used to confirm a
message or setting and also to move to
the next menu or another level.
The option which is selected will have a
check  next to it.
To exit a sub-menu, use the  arrow
buttons to select the
confirm with OK.
While setting the time, no buttons are
pressed for a few seconds, the display
will revert to the previous menu. You will
then have to enter your settings again.
Back  option and