Step 3: Presetting Radio Stations - Sony LBT-XB5 Operating Instructions Manual

Step 3: Presetting
radio stations
You can preset the following number of
stations:
– 3 band model: 20 for FM, 10 for MW, and
10 for LW
– 4 band model: 20 for FM, 10 for MW, 10
for LW, and 5 for UKV
6
POWER
1
Press TUNER/BAND repeatedly
until the band you want appears in
the display.
Each time you press this button, the
band changes as follows:
The bands you can select depend on the
kind of tuner built into your system.
Confirm the bands by pressing TUNER/
BAND repeatedly.
3 band model:
FM n MW n LW
4 band model:
FM n MW n LW n UKV*
* When you select this band, "STEREO PLUS"
appears in the display.
2
Press TUNING MODE repeatedly
until "AUTO" appears in the
display.
3
Press TUNING +/–.
The frequency indication changes and
scanning stops when the system tunes in
a station. "TUNED" and "STEREO" (for
a stereo programme) appear.
LBT-XB3
ALL DISC S
4 2 3,5 1
DOLBY NR
OFF
TUNED
STEREO AUTO
LBT-XB5/XB6
ALL DISC S
4
Press TUNER MEMORY.
A preset number flashes in the display.
LBT-XB3
ALL DISC S
LBT-XB5/XB6
ALL DISC S
5
Press TUNING +/– to select the
preset number you want.
LBT-XB3
ALL DISC S
LBT-XB5/XB6
ALL DISC S
6
Press ENTER/NEXT.
The station is stored.
7
Repeat steps 1 through 6 to store
other stations.
To tune in a station with a weak
signal
Press TUNING MODE repeatedly until
"MANUAL" appears in step 2, then press
TUNING +/– to tune in the station.
Note
The preset stations are cancelled when you
disconnect the mains lead or a power failure occurs
for half a day.
MHz
DOLBY NR
OFF
DOLBY NR
OFF
TUNED
STEREO AUTO
DOLBY NR
OFF
DOLBY NR
OFF
TUNED
STEREO AUTO
DOLBY NR
OFF
AUTO
TUNED
STEREO
MHz
AUTO
TUNED
STEREO
AUTO
TUNED
STEREO
7