Sony LBT-XB5 Operating Instructions Manual page 11

To Do this
Stop playback Press p.
Pause Press P. Press again to resume
playback.
Select a track During playback or pause,
turn the jog dial clockwise (to
go forward) or anticlockwise
(to go backward) and release it
when you reach the desired
track.
Or press AMS* + (to go
forward) or AMS* = (to go
backward) on the remote.
Press and hold ) or 0
Find a point in a
track during playback, and release
at the desired point.
Select a CD Press one of the DIRECT
PLAY buttons (or DISC SKIP).
Play only the CD Press 1/ALL DISCS repeatedly
you have until "1 DISC" appears.
selected
Play all CDs Press 1/ALL DISCS repeatedly
until "ALL DISCS" appears.
Remove or Press 6 OPEN.
change the CDs
Adjust the Turn VOLUME (or press
volume VOLUME +/– on the remote).
* AMS: Automatic Music Sensor.
Tips
• Pressing · while the power is off automatically
turns the power on and starts CD playback if there
is a CD on the tray (One Touch Play).
• You can switch from another source to the CD
player and start playing a CD just by pressing ·
or one of the DIRECT PLAY buttons (Automatic
Source Selection).
• If there is no CD in the player, "NO DISC"
appears in the display.
• You can change the CD in the loading position
during playback.
11