Listening To The Radio - Sony LBT-XB5 Operating Instructions Manual

Listening to the radio

— Preset Tuning
Before using this function, preset radio
stations in the tuner's memory (see "Step
3: Presetting radio stations").
STEREO/MONO
POWER
VOLUME
1
Press TUNER/BAND repeatedly
until the band you want appears in
the display.
Each time you press this button, the
band changes as follows:
3 band models:
FM n MW n LW
4 band model:
FM n MW n LW n UKV
3 2 1
PRESET +/–
TUNER/BAND
VOLUME +/–
2
Press TUNING MODE repeatedly
until "PRESET" appears in the
display.
MANUAL n AUTO n PRESET
3
Press TUNING +/– (or PRESET +/–
on the remote) to tune in the desired
preset station.
LBT-XB3
Preset number
DOLBY NR
OFF
ALL DISC S
LBT-XB5/XB6
ALL DISC S
To Do this
Turn off the radio Press POWER.
Adjust the volume Turn VOLUME (or press
VOLUME +/– on the
remote).
To listen to non-preset radio
stations
Press TUNING MODE repeatedly in step 2
until "MANUAL" appears, then press
TUNING +/– to tune in the desired station.
Tips
• Pressing TUNER/BAND while the power is off
automatically turns on the power and tunes to the
last received station (One Touch Play).
• You can switch from another source to the radio
just by pressing TUNER/BAND (Automatic
Source Selection).
• If an FM programme is noisy, press STEREO/
MONO so "MONO" appears in the display. There
will be no stereo effect, but the reception will
improve. Press this button again to restore the
stereo effect.
• To improve broadcast reception, move the
supplied aerials.
TUNED
STEREO
PRESET
MHz
Frequency
Preset number
DOLBY NR
OFF
PRESET
TUNED
STEREO
MHz
Frequency
13