Enjoying Surround Sound; Using Only The Front Speakers And Sub Woofer; 2Ch Stereo; Enjoying Higher Fidelity Sound - Sony HT-DDW670 Operating Instructions (HT-DDW670) Operating Instructions Manual

Enjoying Surround Sound

Using only the front
speakers and sub woofer

— 2CH STEREO

In this mode, the receiver outputs the sound
from the front left/right speakers and sub
woofer.
When multi channel surround formats are input,
the signals are downmixed to 2 channel with
bass frequencies being output from the sub
woofer.
When standard 2 channel stereo sources are
input, the receiver's bass redirection circuitry
will be activated. The front channel bass
frequencies will be output from the sub woofer.
Press 2CH.
"2CH ST." appears in the display and the
receiver switches to the 2CH STEREO mode.
Enjoying higher fidelity
sound

— AUTO FORMAT DIRECT

The Auto Format Direct (A.F.D.) mode allows
you to select the decoding mode you want for
your audio sound.
A.F.D. mode
(Display)
A.F.D. AUTO
(A.F.D. AUTO)
PRO LOGIC
(DOLBY PL)
PRO LOGIC II MOVIE
(PLII MV)
PRO LOGIC II MUSIC
(PLII MS)
MULTI STEREO
(MULTI ST.)
Decoding the input audio
signal automatically
In this mode, the receiver automatically detects
the type of audio signal being input (Dolby
Digital, DTS, standard 2 channel stereo, etc.)
and performs the proper decoding if necessary.
This mode presents the sound as it was recorded/
encoded, without adding any surround effects.
However, if there are no low frequency signals
(Dolby Digital LFE, etc.) it will generate a low
frequency signal for output to the sub woofer.
Press A.F.D. repeatedly to select "A.F.D.
AUTO".
The receiver automatically detects the type of
audio signal being input and performs the proper
decoding if necessary.
Decoding mode
As encoded
Dolby Pro Logic
Dolby Pro Logic II
continued
GB
25