About The Indications In The Display - Sony HT-DDW670 Operating Instructions (HT-DDW670) Operating Instructions Manual

Home theater system
Hide thumbs Also See for HT-DDW670 Operating Instructions (HT-DDW670):
Table of Contents

Advertisement

About the indications in the display

1
2
LFE
SW
L
C
R
SL S SR
qs
A SW: Lights up when audio signal is output
from the SUB WOOFER jack.
B LFE: Lights up when the disc being played
back contains the LFE (Low Frequency
Effect) channel and the LFE channel signal is
actually being reproduced.
C SP: Lights up when you turn on the receiver.
Turns off when you connect headphones to the
PHONES jack.
D ; DIGITAL: Lights up when the receiver is
decoding signals recorded in the Dolby Digital
format.
E ; PRO LOGIC II: "; PRO LOGIC" lights
up when the receiver applies Pro Logic
processing to 2 channel signals in order to
output the center and surround channel
signals. "; PRO LOGIC II" lights up when
the Pro Logic II Movie/Music decoder is
activated.
F DTS: Lights up when DTS signals are input.
Note
When playing a DTS format disc, be sure that you
have made digital connections and that INPUT
MODE is not set to "ANALOG" (page 28)
G Tuner indicators: Lights up when using the
receiver to tune in radio stations, etc. See
pages 19–22 for tuner operations.
Note
"RDS" appears for models of area code CEL,
CEK only.
24
GB
3
4
;
;
SP
DIGITAL
SLEEP OPT COAX
qa
q;
9
5
6
PRO LOGIC II DTS
H D.RANGE: Lights up when dynamic range
compression is activated (page 29).
I COAX: Lights up when the source signal is a
digital signal being input through the
COAXIAL terminal.
J OPT: Lights up when the source signal is a
digital signal being input through the
OPTICAL terminal.
K SLEEP: Lights up when sleep timer is
activated.
L Playback channel indicators: The letters
(L, C, R, etc.) indicate the channels being
played back. The boxes around the letters vary
to show how the receiver downmixes the
source sound.
L (Front Left), R (Front Right), C (Center
(monaural)), SL (Surround Left), SR
(Surround Right), S (Surround (monaural or
the surround components obtained by Pro
Logic processing))
Example:
Recording format (Front /Surround): 3/2
Sound Field: A.F.D. AUTO
.
STEREO MONO
D.RANGE
8
L
C
R
SL
SR
7
RDS
MEMORY

Advertisement

Table of Contents
loading

Table of Contents