Operation; Before First-Time Use - Ferris FW35 Series Operator's Manual

Neutral Return Pedals:
Icon Control Name
Neutral Return Pedals
The neutral return pedals provide a hands-free return to
neutral. The pedals are used in conjunction with the drive
levers to properly stop the machine. The two pedals are
connected together so depressing one depresses both.
The operator must fully depress the neutral pedal downwards
to return the mower to neutral. The mower must be in the
neutral position to start the engine.
See the Stopping the Mower section for operating instructions
of the neutral return pedals.
Control Locations & Functions - Left Side of
Mower
3
Callout
A Transmission Oil Fill
B Fuel Tank Cap
C Transmission Release Levers
Fuel Tank Cap: To remove the cap, turn counter-clockwise.
Transmission Release Levers:
Control Name
Icon
This unit is equipped with two transmission release levers.
The transmission release levers deactivate the transaxle
so that the unit can be pushed by hand. Both transmission
release levers must be in the same position whether you are
driving the unit or pushing it by hand. See Pushing the Unit by
Hand for operational information.
Cutting Height Adjustment Handle:
Icon
Cutting Height Adjustment Handle
The cutting height adjustment handle controls the mower
deck cutting height. To raise the mower deck cutting height:
crank the cutting height adjustment handle clockwise. To
lower the mower deck cutting height crank: the cutting height
adjustment handle counter-clockwise.

Operation

Before First-Time Use

• Be sure to read all information in the Safety and
Operation sections before attempting to operate this unit.
• Become familiar with all of the controls and how to stop
the unit.
• Operate in an open area without engaging the PTO to
become accustomed to the unit.
WARNING
Read the operator's manual before attempting to
operate the machine.
If you do not understand how a specific control functions,
or have not yet thoroughly read the Features and Controls
section, do so now.
Do not attempt to operate the mower without first becoming
familiar with the location and function of all controls.
Control Name
Transmission Release Levers
Control Name
13