Enjoying Stereo Or Bilingual Broadcasts ("Dual Mono") - Sony DAR-RD100 Operating Instructions Manual

Note
This function may not work depending on the input
stream, or the selected input source and the Sound Field
setting. When active, "A/V SYNC" lights up on the
centre unit display.
Enjoying Stereo or Bilingual
Broadcasts ("DUAL MONO")
This recorder receives bilingual NICAM or
ZWEITON broadcasts. You can switch between
audio channels during reception or recording, or
during playback of DVD-RWs. Select the channel
and speaker output, as below.
1 2
4 5
7 8
0
AMP MEMU
</M/m/,,
ENTER
1
Set the AMP/DVD switch to AMP, and press
AMP MENU.
The AMP menu appears.
2
Press M/m to select "CUSTOMIZE," and
press ENTER or ,.
3
Press M/m to select "DUAL MONO," and
press ENTER or ,.
Example:
4
Press M/m to select a setting.
"MAIN" (default): Main sound is output from
the centre speaker.
"SUB": Sub sound is output from the centre
speaker.
"MAIN+SUB": Main and sub sound are
output from the centre speaker.
"MAIN/SUB": Main sound is output from the
front left speaker; sub sound from the front
right speaker.
5
Press ENTER or AMP MENU to turn off the
AMP menu.
AMP/DVD
switch
3
6
9
,continued
89