Table of Contents
Advertisement
Enjoying Stereo or Bilingual
Broadcasts (DUAL MONO)
You can switch between audio channels when you
play a DVD-RW disc or the system receives
multiplex sound from a component that is
connected to the DVD (DIGITAL IN OPTICAL)
jack. Select the channel and speaker output, as
below.
AMP MENU
</M/m/,,
ENTER
1
Press AMP MENU repeatedly until the AMP
menu (page 24) appears in the centre unit
display.
2
Press M/m to select "CUSTOMIZE," and
press ENTER or ,.
3
Press M/m to select "DUAL MONO," and
press ENTER or ,.
Example:
4
Press M/m to select a setting.
"MAIN" (default): Main sound is output from
the centre speaker.
"SUB": Sub sound is output from the centre
speaker.
"MAIN+SUB": Main and sub sound are
output from the centre speaker.
"MAIN/SUB": Main sound is output from the
front left speaker; sub sound from the front
right speaker.
5
Press ENTER or AMP MENU to turn off the
AMP menu.
To return to the previous layer
Press <.
To operate the connected component after
setting
Select the component (input source) by pressing
DVD, VIDEO, or TUNER/BAND after turning
off the AMP menu.
Note
If "CENTER SP" is set to "CENTER NO" in the AMP
menu (page 25), sound is output from the front left and
right speakers.
23
Advertisement
Table of Contents
