Display; Using The Display; Other Features; Falling Asleep To Music - Sony CMT-M70 Primary Operating Instructions Manual

Display

Using the display

Checking the remaining time
(CD)
Press DISPLAY on the remote during play.
Each time you press the button, the display
changes cyclically as follows:
Current track number and elapsed playing time
of the track t Current track number and
remaining playing time of the track* t
Remaining playing time of the entire CD t
Clock display
* "– – –.– –" appears when you check the remaining
playing time of a CD track whose number is 25 or
over.
Checking the total playing
time (CD)
Press DISPLAY on the remote in stop
mode.
Each time you press the button, the display
changes cyclically as follows:
Total playing time t Clock display t
Current source display
GB
16

Other Features

Falling asleep to music

— Sleep Timer

The Sleep Timer Function lets you specify a
sleep time, after which the system stops playing
and turns off automatically. You can thus fall
asleep to music.
Press SLEEP on the remote repeatedly.
The sleep time changes as follows:
AUTO* t 90MIN t 80MIN t 70MIN t
... t 10MIN t OFF t AUTO* t ...
* The system turns off after the current CD or tape
finishes playing (up to 100 minutes). The system
also turns off when you manually stop the CD or
tape.
To
Press
Check the remaining
SLEEP on the remote once.
sleep time**
Change the sleep time
SLEEP on the remote
repeatedly until the time
you want appears.
Cancel the Sleep
SLEEP on the remote
Timer Function
repeatedly until "OFF"
appears.
** You cannot check the remaining time if you select
"AUTO".
Waking up to music
— Daily Timer
By setting the Daily Timer, you can make the
system automatically turn on and off at
specified times. To use this function, make
sure that you have set the system clock
correctly (see "Setting the clock" on page 7).