Table of Contents
Advertisement
19.
Never use the Plasma Cutter near water. Ensure that the surrounding area
and cutting objects are dry. Do not spray water or other liquids on or near the
Plasma Cutter.
20.
Avoid all direct contact between the skin and wet garments and metal parts
under electrical power. Check that gloves and protective clothing are dry.
21.
Always wear welding gloves and rubber soled shoes when working in damp
areas or standing on metal objects.
22.
Always turn off the Plasma Cutter in the event of a power failure.
23.
Do not allow the Torch Head to touch earth ground. Accidental earth dis-
charges may cause overheating and fire hazards.
24.
Significant DC voltage exists after turning off and unplugging the Plasma
Cutter. Discharge the electrode to ground before handling.
25.
Position a fire-resistant screen (not included) around the Plasma Cutting
area to protect people in the vicinity from arc rays, sparks, and slag.
26.
Clear away or protect flammable objects. Protect objects such as wood, saw
dust, clothing, paints, solvents, petroleum products, natural gas, acetylene,
propane, and other substances with fireproof material (not included).
27.
Keep an ABC type fire extinguisher near the work area.
28.
Never perform welding or cutting operations on closed pipes or containers,
as the possible internal fumes may cause an explosion.
29.
Never perform welding or cutting operations on open pipes or containers
that may have come in contact with moisture, chemicals, or flammable
materials. Always clean and dry the areas first.
30.
Welding and cutting fumes and gases may be hazardous if inhaled for long
periods of time.
31.
Install a natural or forced-air ventilation system in the work area. If the
ventilation system is inadequate, use an air respirator.
32.
Use a forced-air ventilation system when welding or cutting lead, beryllium,
cadmium, zinc, zinc-coated or painted materials. Always wear an air respira-
tor.
33.
When welding or cutting in small areas, the operator should be externally
SKU 90648
90648.p65
9
PAGE 9
12/1/2003, 10:56 AM
Advertisement
Table of Contents
