Page 1
DENT REPAIR STUD WELDER 98357 SET UP AND OPERATINg INSTRUcTIONS ® Distributed exclusively by Harbor Freight Tools 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury.
Power tool plugs must match the hazardous situation which, if outlet. Never modify the plug in not avoided, could result in any way. Do not use any adapter minor or moderate injury. SKU 98357 For technical questions, please call 1-800-444-3353. Page 2...
Page 3
Do not use the power tool if the switch does not turn it on and off. Use personal protective equip- Any power tool that cannot be con- ment. Always wear eye protection. SKU 98357 For technical questions, please call 1-800-444-3353. Page 3...
Service Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. SKU 98357 For technical questions, please call 1-800-444-3353. Page 4...
Page 5
ANSI- cannot be built into this product, but approved respirator, are must be supplied by the operator. ESSENTIAL to reduce the risk of developing the SAVE THESE above illnesses. INSTRUcTIONS. SKU 98357 For technical questions, please call 1-800-444-3353. Page 5...
Association, and the National Electri- electrically malfunction or break cal Code. (See Outlets for 2-Prong down, grounding provides a low Plug.) resistance path to carry electricity away from the user, reducing the risk SKU 98357 For technical questions, please call 1-800-444-3353. Page 6...
No Load Revolutions per Minute n 0 xxxx/min. indicate it is acceptable for outdoor (RPM) use. Make sure the extension cord is prop- erly wired and in good electrical con- SKU 98357 For technical questions, please call 1-800-444-3353. Page 7...
12. Always make sure the power cord to the Stud Welder is unplugged from its electrical outlet prior to assembling or making any adjustments to the tool. SKU 98357 For technical questions, please call 1-800-444-3353. Page 8...
Page 9
(32) against the metal surface until exposed. the Electrode Assembly (26) is flush with the metal surface. See FIgURE When done with the Stud Welder, 3, above. unplug the tool and store it safely. SKU 98357 For technical questions, please call 1-800-444-3353. Page 9...
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts. SKU 98357 For technical questions, please call 1-800-444-3353. Page 11...
This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353 SKU 98357 For technical questions, please call 1-800-444-3353. Page 13...