The unified Daikin REFNET piping system is especially designed for simple installation
•
The use of REFNET piping in combination with electronic expansion valves, results in a dramatic reduction in imbalance in refrigerant flowing between
indoor units, despite the small diameter of the piping.
•
REFNET joints and headers (both accessories) can cut down on installation work and increase system reliability.
•
Compared to regular T-joints, where refrigerant distribution is far from optimal, the Daikin REFNET joints have specifically been designed to optimise
refrigerant flow.
REFNET joint
Attached insulators for REFNET joint
6-6
Increased installation flexibility - VRVII
Outdoor units can be installed far back from former location.
Duct
Duct
current
6-7
High external static pressure : 6mm H
Daikin now offers high external static pressure as standard to meet requirements of indoor installation.
6-8
4-way piping connection - VRVII & VRV-WII
VRVII series not only offer the possibility to run piping from the front, but also from the left, right or bottom, thus providing greater freedom of layout.