Canon W6400 Series Service Manual page 178

Chapter 7
PURGE
INK VALVE
LF MOTOR
CR MOTOR
MT-CARTRIDGE This checks the presence of maintenance cartridge.
CUTTER
e) COUNTER
Displays the service life (number of operation times and time) of each unit and print counts for each media type.
The count values under this option can be printed using the "PRINT INF" option.
- PRINTER Counter for product life
Display
LIFE
POWER ON
POWER ON(2)
POWER ON(3)
LF DIST.
LF DIST.(2)
LF DIST.(3)
W-INK
CUTTER
WIPE
- CARRIAGE Counter for carriage unit
Display
PRINT
DRIVE
CR COUNT
CR COUNT(2)
CR COUNT(3)
CR DIST.
CR DIST.(2)
CR DIST.(3)
PRINTCOUNT
PRINTCOUNT(
2)
PRINTCOUNT(
3)
- PURGE Counter for purge unit
7-8
This checks operation of the recovery system.
After the carriage is moved to the homeposition, the recovery suction operation
is performed independently in the recovery system.
Operation check of ink supply valve.
This drives the valve motor and performs one rotation of the ink supply valve
cam.
This checks operation of the feed motor.
The media is moved forward 500 mm and then stopped regardless of whether
media is loaded or not.
This checks operation of the carriage motor.
The carriage moves back and forth once at the maximum printing width
regardless of whether media is loaded or not.
"CHECK END" is displayed if a proper maintenance cartridge is installed.
Otherwise "ERROR E02818" is displayed.
This checks operation of the cutter.
If this mode is executed when the printer is set to roll media mode, the printer
repeats the operation of feeding the roll media by approximately 100 mm and
cutting until the specified number of times is reached regardless of whether roll
media is loaded or not. (Setting range: 1 to 999 times)
The printer switches to the roll media setting if this mode is executed when the
printer is in cut sheet mode.
T-7-6
Description
Number of printed media expressed as A1 equivalent (for
checking printer durability)
Cumulative power-on time
For factory
For factory
Cumulative feed distance of feed roller (210 mm/sheet)
For factory
For factory
Maintenance cartridge tank full detection counter
Number of cutter usages
Wiping operation count
T-7-7
Description
Cumulative printing time
Cumulative carriage driving time
Cumulative carriage scan count (one back-and-forth motion = 1) times
For factory
For factory
Cumulative carriage scan distance (210 mm/sheet)
For factory
For factory
Cumulative print end count
For factory
For factory
Unit
sheets
Hours
-
-
sheets
-
-
ml
times
times
Unit
Hours
Hours
-
-
sheets
-
-
times
-
-