Canon W6400 Series Service Manual page 176

Chapter 7
TMP BK
TMP C
TMP M
TMP Y
TMP PC
TMP PM
SIZE LF
SIZE CR
3) HEAD
Displays the following EEPROM information in the printhead.
Display
S1
L1
4) INK
Displays the following EEPROM information in the ink tank.
Display
BK
C
M
Y
PC
PM
5) WARNING
Displays the warning history (up to 20 events). The newest event has the smallest history number.
6) ERROR
Displays the error history (up to 20 events). The newest event has the smallest history number.
7) INK CHECK
Display the execution history of "Ink Check Off" in the Main Menu. (Bk, MBk, C, M, Y, PC, PM)
0= No execution history
1= One or more execution histories exist
b) I/O DISPLAY * To be supported by next version
Displays the status of the port I/O signal of the sensors and other devices connected to the engine controller.
c) ADJUST
Performs adjustment and prints the adjustment and check patterns needed for adjusting the printer parts.
- PRINT PATTERN > NOZZLE
This is used for a nozzle check pattern during servicing that prints in 1-pass and single direction. This is used to check for nozzles that are not discharging
properly. It takes about 2 minutes to print this pattern.
7-6
Calibrated temperature of head temperature sensor (Bk)
Calibrated temperature of head temperature sensor (C)
Calibrated temperature of head temperature sensor (M)
Calibrated temperature of head temperature sensor (Y)
Calibrated temperature of head temperature sensor (PC)
Calibrated temperature of head temperature sensor (PM)
Detected size of loaded media (feeding direction) / Unit: mm
Detected size of loaded media (carriage direction) / Unit: mm
T-7-3
Description
Printhead serial number
Printhead lot number
T-7-4
Description
Bk ink tank lot number / Date of manufacture / Expiration date
C ink tank lot number / Date of manufacture / Expiration date
M ink tank lot number / Date of manufacture / Expiration date
Y ink tank lot number / Date of manufacture / Expiration date
PC ink tank lot number / Date of manufacture / Expiration date
PM ink tank lot number / Date of manufacture / Expiration date