Table of Contents
Advertisement
Other Operations
Naming preset stations
and functions
You can enter a name of up to 8 characters for
preset stations and functions and display it in
the receiver's display.
1
To index a preset station
Rotate FUNCTION to select TUNER,
then tune in the preset station you want
to create an index name for (page 28).
To index a function
Rotate FUNCTION to select a function
you want to create an index name for.
2
Press CUSTOMIZE.
The CUSTOMIZE button lights up and
"<<<CUSTOMIZE>>>" appears in the
display.
3
Press the cursor button ( ) to select
"NAME IN?".
The preset station name or the function
name flashes.
4
Press ENTER.
The cursor flashes and you can select a
character.
5
Create an index name by using the jog
dial and cursor buttons (
Turn the jog dial to select a character, then
press the cursor button ( ) to move the
cursor to the next position.
Tips
• You can select the character type as follows by
turning the jog dial.
Alphabet (upper case) t Alphabet (lower case)
t Numbers t Symbols
• To enter a blank space, turn the jog dial until a
blank space appears in the display.
• If you made a mistake, press the cursor button
(
or
) until the character you want to change
flashes, then turn the jog dial to select the
correct character.
6
Press ENTER.
The entered name is registered.
7
To create index names for other preset
stations and functions, repeat steps 1
to 6.
Note
(Models of area code CEL only)
When you name an RDS station and tune in the
station, the Program Service (PS) name appears
instead of the name you entered. (The name you
entered will be overwritten by the Program Service
(PS) name.)
or
).
GB
57
Hide quick links:
Advertisement
Table of Contents
