Table of Contents
Advertisement
x COLOR SYSTEM
(OSD color system)
(Models of area code CEL only)
Lets you select the color system.
• NTSC
• PAL
x OSD COLOR
(Color of the on-screen display)
Lets you select the color of the on-screen display.
• COLOR
The on-screen display is displayed in color.
• MONOCHROME
The on-screen display is displayed in monochrome.
x OSD H.POSITION
(OSD horizontal position)
Initial setting: 4
Lets you adjust the position of the on-screen display
horizontally. You can adjust from 0 to 64.
x OSD V.POSITION
(OSD vertical position)
Initial setting: 4
Lets you adjust the position of the on-screen display
vertically. You can adjust from 0 to 32.
x COMMAND MODE (Command mode)
Lets you select the command mode of the remote. If
the command mode of the receiver and the remote is
different, operation from the remote is not possible.
• AV1
• AV2
x NAME IN?
(Naming preset stations and functions)
For details, see "Naming preset stations and
functions" on page 57.
Advanced SET UP menu
parameters
When "MENU EXPAND" is set to "ON", all
of the following parameters are displayed and
adjustable.
See page 19 for the SET UP menu adjustments.
Initial settings are underlined.
All SET UP menu parameters
FRONT SP
CENTER SP
SURROUND SP
SURR BACK SP
SURR BACK L/R
SUB WOOFER
FRONT XX.X meter
CENTER XX.X meter
SURROUND XX.X meter
SURR BACK XX.X meter
SUB WOOFER XX.X meter
S.W PHASE*
DISTANCE UNIT*
SURR POSI.*
SURR HEIGHT*
SURR BACK HGT.*
FRONT SP > XXX Hz*
CENTER SP > XXX Hz*
SURROUND SP > XXX Hz*
SURR BACK SP > XXX Hz*
LFE HIGH CUT > XXX Hz*
* Adjustable only when "MENU EXPAND" is set to
"ON".
continued
GB
49
Hide quick links:
Advertisement
Table of Contents
