4: Connecting The Ac Power Cord - Sony STR-VA333ES Operating Instructions Manual

4: Connecting the AC
power cord
Connect the supplied AC power cord to the AC
IN terminal on the receiver, then connect the
AC power cord to a wall outlet.
You can connect up to one component to the
AC OUTLET on the receiver.
SPEAKERS
ONT L
–
+
– +
ROUND
L
–
+
– +
BACK L
AC IN terminal
* The configuration, shape, and number of AC outlets
vary according to the model and country to which
the receiver is shipped.
GB
18
AC power cord
(supplied)
AC OUTLET
AC OUTLET
CENTER
–
+
IMPEDANCE SELECTOR
4 8
Notes
• The AC OUTLET on the rear of the receiver is a
switched outlet, which supplies power to the
connected component only while the receiver is
turned on.
• Make sure that the total power consumption of the
component connected to the receiver's AC
OUTLET does not exceed the wattage stated on the
rear panel. Do not connect high-wattage electrical
home appliances such as electric irons, fans, or TVs
to this outlet. This may cause a malfunction.
*