Extreme Tweaker Menu - Asus Crosshair IV Extreme Manual

3.3

Extreme Tweaker menu

The Extreme Tweaker menu items allow you to configure overclocking-related
items.
Take caution when changing the settings of the Extreme Tweaker menu items.
Incorrect field values can cause the system to malfunction.
The default values of the following items vary depending on the CPU and
memory modules you install on the motherboard.
Extreme Tweaker Main Advanced Power Boot Tools Exit
Configure System Performance Settings
Target CPU Frequency: 2793MHZ
Target DRAM Frequency: 1066MHZ
CPU Level Up
-------------------------------------------------
Ai Overclock Tuner
CPU Ratio Setting
DRAM Frequency
CPU/NB Frequency
HT Link Speed
DRAM Timing Configuration
DRAM Driving Configuration
******* Please key in numbers directly!*******
Extreme OV
CPU Offset Voltage
CPU/NB Offset Voltage
CPU PWR Frequency
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
Scroll down to display the following items:
CPU VDDA Voltage
DRAM Voltage
HT Voltage
NB Voltage
NB 1.8V Voltage
SB Voltage
VDDR Voltage
VDDPCIE Voltage
DRAM CTRL REF Voltage on CHA
DRAM DATA REF Voltage on CHA
DRAM CTRL REF Voltage on CHB
DRAM DATA REF Voltage on CHB
DRAM CTRL REF Voltage on CPU
***********************************************
CPU Load-Line Calibration
CPU/NB Load-Line Calibration
CPU Spread Spectrum
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
ROG Crossfire IV Extreme
Crossfire IV Extreme BIOS Setup
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Disabled]
1.144 [Auto]
1.085 [Auto]
[Auto]
2.527 [Auto]
1.568 [Auto]
1.217 [Auto]
1.105 [Auto]
1.802 [Auto]
1.052 [Auto]
1.205 [Auto]
1.113 [Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
Version 0243
Warning: this function
belongs to overclock-
ing, and it may cause
instability.
Select a CPU level,
and the rest will be
auto-adjusted. If you
want to adjust more,
set Ai Overclock Tuner
to Manual after you
select a CPU level.
←→ Select Screen
↑↓ Select Item
+- Change Field
F1 General Help
F10 Save and Exit
ESC Exit
←→ Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
3-9