System Information - Asus Crosshair IV Extreme Manual

SATA Port5 - Port6 [IDE]
[IDE]
[RAID]
[AHCI]
You can only set SATA Port5-Port6 to [IDE] if Port1-Port4 is set to [IDE]
3.4.7

System Information

This menu gives you an overview of the general system specifications. The BIOS
automatically detects the items in this menu.
Main
BIOS Information
Version : 0243
Build Date: 07/05/10
Processor
Type : AMD Athlon(tm) II X3 405e Processor
Speed : 2300MHz
System Memory
Usable Size : 2047MB
BIOS Status
Now BIOS status : BIOS1
3-20
Set to [IDE] when you want to use the Serial ATA hard disk drives
as Parallel ATA physical storage devices.
Set to [RAID] when you want to create a RAID configuration from
the SATA hard disk drives.
Set to [AHCI] when you want the SATA hard disk drives to use the
AHCI (Advabced Host Controller Interface). The AHCI allows the
onboard storage driver to enable advanced Serial ATA features
that increases storage performance on random workloads by
allowing the drive to internally optimize the order of commands.
Crossfire IV Extreme BIOS Setup
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
Version 0243
←→ Select Screen
↑↓ Select Item
+- Change Field
F1 General Help
F10 Save and Exit
ESC Exit
Chapter 3: BIOS Setup