Using The Sleep Timer; Selecting The Speaker System - Sony STR-DA2000ES Operating Instructions (primary manual) Operating Instructions Manual

Using the Sleep Timer

You can set the receiver to turn off automatically
at a specified time by using the remote.
For details, refer to the operating instructions
supplied with the remote.
Press ALT, then press SLEEP repeatedly
while the power is on.
Each time you select or press SLEEP, the
display changes cyclically as follows:
2:00:00 t 1:30:00 t 1:00:00 t 0:30:00 t
OFF
While using Sleep Timer, "SLEEP" lights up in
the display.
Tip
To check the remaining time before the receiver turns
off, press ALT, then press SLEEP on the remote. The
remaining time appears in the display.
GB
46
Selecting the speaker
system
You can select the front speaker system you
want to use.
Press SPEAKERS repeatedly to select the
front speaker system you want to use.
The selected speaker system appears in the
display. To turn off the speaker output, press
SPEAKERS repeatedly until SP.A and SP.B
indication turn off.
The speaker system
• SP.A
The speakers connected to the FRONT
SPEAKERS A terminals.
• SP.B
The speakers connected to the FRONT
SPEAKERS B terminals.
• SP.A SP.B
The speakers connected to both the FRONT
SPEAKERS A and B terminals (parallel
connection).