Advertisement
Watching Television from a remote room set-top box (Zone 2 Only)
In this mode you will be listening to TV sound through the television's speakers only, not through
IMPORTANT NOTE:
the system speakers.
• Use your local TV controls, not the keypad.
Watching DVDs (Zone 2 Only)
Turn clockwise to raise the volume. Turn counterclockwise to lower the volume.
1. Volume Control.
2. DVD Source Select button.
the correct A/V receiver input. Activates "Play" on the DVD changer. Changes the keypad mode to operate
DVD functions.
Press to turn the Room system power off. Press and hold to turn the Zone system power off.
3. Power button.
4.
Indicates system status. Lights up GREEN when the room speakers are on, RED when the system
Status LED.
is on but the local speakers are muted. When the LED is off, the system is off.
Activates DVD Play.
5. Play button.
Stops DVD playback.
6. Stop button.
Temporarily halts DVD playback. Press again to resume playback.
7. Pause button.
Activates DVD reverse scan. Press again for high-speed scan.
8. Rewind button.
Activates DVD forward scan. Press again for high-speed scan.
9. Fast Forward button.
Goes to the next DVD chapter. Press repeatedly to skip forward multiple chapters.
10. + button.
Press - to go to the beginning of the current DVD chapter or to the previous chapter if you're already at
11. - button.
the beginning. Press repeatedly to skip back multiple chapters.
Press once to block the audio portion of the program temporarily, as during a telephone
12. Mute button.
conversation. Press again to resume hearing the audio portion of the program.
Advances the 5-disc DVD changer to the next disc.
13. Disc + button.
Shuts down the entire system, except for the Main Room television.
14. System Off button.
Watching VHS Tapes (Zone 2 Only)
Turn clockwise to raise the volume. Turn counterclockwise to lower the volume.
1. Volume Control.
2. VCR Source Select button.
correct input. Changes the wall panel mode to operate the VCR functions.
Press to turn the Room system power off. Press and hold to turn the Zone system power off.
3. Power button.
Indicates system status. Lights up GREEN when the room speakers are on, RED when the system is
4. Status LED.
on but the local speakers are muted. When the LED is off, the system is off.
Activates VCR Play.
5. Play button.
Stops VCR playback.
6. Stop button.
Temporarily halts playback on the selected component. Press again to resume playback.
7. Pause button.
8. Rewind button. From the Stop mode, activates rewind. From the Play mode, activates reverse scan.
From the Stop mode, activates fast forward. From the Play mode, activates forward scan.
9. Fast Forward button.
Advanced
Operations:
Automatically turns on the DVD changer, A/V receiver and the zone amplifier. Sets
Automatically turns on the VCR and A/V receiver and sets the A/V receiver to the
Remote Room
15
Advertisement
