Advertisement
Listening to CDs
Shuts off power to entire system, regardless of which components happen to be on at the time.
1. System Off button.
Use these keys to enter CD disc numbers or track numbers. (To enter the disc number, first
2. Numeric Keypad.
press the Disc button.)
Press once to block the audio portion of the program temporarily, as during a telephone
3. Mute button.
conversation. Press again to resume hearing the audio portion of the program.
Enters the numbers you've pressed on the numeric keypad.
4. Enter button.
Enables you to go directly to one of your 400 CDs by triggering the Disc command. Then press the
5. Jump button.
CD number on the numeric keypad and press the enter button.
Acts as the +10 button when accessing CD tracks higher than 10.
6. TV/Video button.
Enables you to access discs directly by number.
7. Disc button.
a. For example, to play disc #371 in the 400-CD changer, press Disc, 3, 7 and 1.
b. For discs with numbers of less than two digits, press the Enter button after the
disc number. For example, to play disc #2, press Disc, 2, and the Enter button.
8. Volume +/- buttons. Adjusts the A/V receiver volume.
Press + to go to the next CD track. Press - to go to the beginning of the current CD track or
9. Ch/Track +/- buttons.
to the previous track if you're already at the beginning. Press repeatedly to skip forward or back multiple tracks.
Activates CD reverse scan.
10. Rewind button.
Activates CD Play.
11. Play button.
Activates CD forward scan.
12. Fast Forward button.
Temporarily halts CD playback. Press again to resume playback.
13. Pause button.
14. CD Source Select button.
correct input on the A/V receiver. Changes the remote control mode to operate the CD functions.
Listening to AM/FM Stations
Shuts off power to entire system, regardless of which components happen to be on at the time.
1. System Off button.
Use these keys for choosing AM/FM preset stations or for Direct Tuning of stations by radio
2. Numeric Keypad.
frequency. (For Direct Tuning, first press the Enter button.)
Press once to block the audio portion of the program temporarily, as during a telephone
3. Mute button.
conversation. Press again to resume hearing the audio portion of the program.
Selects the direct tuning mode, which enables you to use the Numeric Keypad to tune a station
4. Enter button.
by entering its radio frequency.
For example, to tune 103.7 FM, press Enter, 1, 0, 3, and 7.
a.
To tune 92.3 FM, press Enter, 9, 2, and 3.
b.
To tune 880 AM, press Enter, 8 and 8. There is no need to press 0.
c.
To tune 1010 AM, press Enter, 1, 0, and 1.
d.
Cycles between AM and FM tuning.
5. Jump button.
Adjusts the A/V receiver volume.
6. Volume +/- buttons.
Advanced
Operations:
Automatically turns on the CD changer and A/V receiver. Automatically selects the
Main Room
13
Advertisement
