Siemens SIPLUS PSU Operating Instructions Manual page 3

Qualified personnel
The device/system must only be set up and used in conjunction with this documentation. Transport,
commissioning and operation of the device/system may only be performed by qualified personnel.
For the purpose of the safety information in these Operating Instructions, a "Qualified Person" is
someone who is authorized to energize, ground, and tag equipment, systems, and circuits in accord-
ance with established safety procedures.
Correct usage of Siemens products
Please observe the following:
Danger in case of none designated use of the product!
Serious injury may result.
Siemens products may only be used for the applications indicated in the cata-
log and in the relevant technical description. If third-party products and com-
ponents are used, these must be recommended or approved by Siemens. To
ensure trouble-free and safe operation of the products, they must be appropri-
ately transported, stored, assembled, installed, commissioned, operated and
maintained. The permitted environmental and ambient conditions must be ad-
hered to. Notices in the relevant documentation must be observed.
Risk to be burnt!
Burns at the hands by hot surfaces of the equipment's housing or the heat
sink!
Do not touch the surface of the housing and the heat sink and let it cool down
before an exchange.
Note
For ecologically compatible recycling and disposal of your old device, contact a certifi-
cated waste disposal service for electronic scrap. Please dispose the old device ac-
cording to the local regulations in your country.
SIPLUS PSU Power Supply Unit
Copyright (C) Siemens AG 2018
WARNING
CAUTION
A5E00854207E
V 8.00 released
SIPLUS PSU (6DL3500-8BA)
3 of 30
2018-05-03