Lighting System
Headlight Bulb and Assembly Replacement
● Remove:
Headlight Unit [A].
Bulb Holder [B]
● Slide back the dust protection, and remove the bulb from the
headlight unit.
○ Turn the holder counterclockwise and pull it out.
● Be sure the socket is clean.
● Insert the new bulb by aligning the tang with the notch in the
headlight unit.
If you touch the bulb with your bare hands, clean the bulb
with a cloth moistened with alcohol or soapy water to
prevent premature bulb failure.
● Push the holder in, turn it clockwise, and release it, it should lock
in position.
● Fit the dust cover completely.
Taillight Bulb and Assembly Replacement
● Remove:
Taillight Bracket Screw *3 [A]
Taillight Unit
● Insert the new bulb
If you touch the bulb with your bare hands, clean the bulb
with a cloth moistened with alcohol or soapy water to
prevent premature bulb failure.
Indicator Bulb and Assembly Replacement
● Remove:
Indicator Screw [B]
● Insert the new bulb
If you touch the bulb with your bare hands, clean the bulb
with a cloth moistened with alcohol or soapy water to
prevent premature bulb failure.
CAUTION
CAUTION
CAUTION
【7-29】
ELECTRICAL SYSTEM
A
A
B
B