Wheel (Rim); Removal; Installation - Dinli DL-702 2008 Service Manual

WHEELS/TIRES
Wheel (Rim)
Removal
● Loosen the wheel nuts [A] for just one turn.
● Support the vehicle on a stand or the jack so that the wheels are
off the ground.
● Take off the wheel nuts and remove the wheel.
Installation
● Check the tire rotation mark [A] on the tire, and install the wheel
accordingly.
○ The direction of the tire rotation is shown by an arrow on
the tire sidewall.
● Position the wheel so that the air valve [B] is toward the outside
of the vehicle.
● Tighten the wheel nuts to the specified torque in a criss‐cross
pattern.
Tightening Torque: 60 N‐m (6.0 kgf‐m, 43.5 lb‐ft)
NOTE
【2-4】
A
A
B
A