GENERAL INFORMATION
Fuel, Oil and Engine Coolant Recommendation
Fuel (For USA and Canada)
● Use only unleaded gasoline of at least 87 pump octane (R/2 + M/2) or 95 octane or higher rated by the
Research Method.
● Gasoline containing MTBE (Methyl Tertiary Butyl Ether), less than 10% ethanol, or less than 5 % methanol
with appropriate cosolvents and corrosion inhibitor is permissible.
Fuel (For Other Countries)
● Gasoline used should be graded 95 octane (Research Method) or higher. An unleaded gasoline is
recommended.
Engine Oil (For USA)
● Dinli recommends the oil which is rated SF or SG under the API(American Petroleum Institute) service
classification. The recommended viscosity is SAE 10W‐40. If SAE 10W‐40 oil is not available, select an
alternative according to the following chart.
Engine Oil (For Other Countries)
● Use a premium quality 4‐stroke motor oil to ensure longer
service life of your vehicle. Use only oil which are rated
SF or SG under the API service classification. The
recommended viscosity is SAE 10W‐40. If SAE 10W‐40
motor oil is not available, select an alternative according
to the right chart.
Front Differential Gear Oil
● Use hypoid gear oil that meets the API service classification GL‐5 and is rated SAE #80W‐90.
Rear Gear (Final) Box Oil
● Use hypoid gear oil that meets the API service classification GL‐5 and is rated SAE #80W‐90.
【1-8】