Programming The Cd Tracks - Sony DHC-MD5 Operating Instructions Manual

Programming the CD
tracks
–– Programme Play
You can make a programme of up to
32 tracks from all the CDs in the order you
want them to be played.
2 1
· ∏
· ∏
7
1
Press FUNCTION repeatedly until
"CD" appears in the display, then
place a CD on the disc tray.
2
Press PLAY MODE repeatedly until
"PROGRAM" appears.
3
Press one of the DISC 1 – 3 buttons
to select a CD.
4
Turn MULTI JOG until the desired
track appears in the display.
Selected track Playing time
5
Press ENTER/YES.
The track is programmed. The last
programmed track appears, followed by
the total playing time.
6
7
4 5
To check the total number of the
programmed tracks
Press DISPLAY in the stop mode.
º ‚
"Step" appears, followed by the total number
π §
®
of the programmed tracks.
To
Cancel
π §
Programme
Play
3
π
Add a track to
the programme
(in stop mode)
Clear the entire
programme
Tips
• To programme the entire CD as one step of the
programme, skip step 4.
• The programme you made remains after the
Programme Play has finished. To play the same
programme again, press ·. When you make a
recording with the Hit Parade feature, the
programme is erased.
• The total playing time is not displayed when you
select a track whose number is 21 or over or, the
total program time exceeds 100 minutes.
To programme additional tracks,
repeat steps 3 to 5.
Skip step 3 if you select a track from
the same disc.
Press ·.
All the tracks play in the order you
selected.
Press
π, then PLAY MODE
repeatedly so that
"PROGRAM" disappears.
1 Select the disc tray with
DISC 1 – 3 buttons.
2 Select the track by turning
MULTI JOG.
3 Press ENTER/YES.
π once in the stop mode.
DHCMD5 3-858-047-12 (1)EN
17