Basic Operations; Playing A Cd - Sony DHC-MD5 Operating Instructions Manual

Basic Operations

Playing a CD

You can play up to three CDs continuously.
0/)
POWER 1/ALL DISCS
· ∏
· ∏
· ∏ π
EX-CHANGE
DISC SKIP
1
Press § and place a CD on the disc
tray.
With the label
side up. When
you play a single
CD, place it on
the inner circle
of the tray.
To place the third disc, press DISC SKIP
to rotate the disc tray.
2
Press one of the DISC 1 – 3 buttons.
The disc tray closes and play starts.
If you press · when the disc tray is
closed, play starts from the CD loaded
on the tray whose button is lit green.
Disc tray number
Track number
To
Stop play
Pause
Select a track
VOLUME
MULTI JOG
º ‚
π §
®
Find a point in
a track
§
π
Select a CD
Play only the
CD you have
selected
Play all CDs
1 2
Remove or
exchange the
CD
Exchange the
CD during
play
Adjust the
volume
* AMS: Automatic Music Sensor.
Playing time
Do this
Press π.
Press ∏. Press again to resume
play.
Turn MULTI JOG clockwise (to
go forward) or
counterclockwise (to go back)
and release it when you locate
the desired track. (or press
AMS* + or = on the
remote). Turn and hold
MULTI JOG to locate other
discs.
Press ) or 0 during play
and release it at the desired
point.
Press DISC SKIP (or D. SKIP on
the remote).
Press 1/ALL DISCS repeatedly
until "1 DISC" appears.
Press 1/ALL DISCS repeatedly
until "ALL DISCS" appears.
Press §.
Press EX-CHANGE. Press
again to close the tray.
Turn VOLUME (or press
or on the remote).
continued
DHCMD5 3-858-047-12 (1)EN
9