Displaying The Setting Window For The Administrator Directly; About Viewers - Sony SNC-RZ25N User Manual

Note
If the Welcome page does not activate correctly, the
security level of the Internet Explorer may be set to
Medium or higher. See "To display the Welcome page
correctly" on page 11 and check the security level.
Displaying the setting window for
the administrator directly
When the administrator sets the camera functions, the
setting window can be displayed directly from the
welcome page.
1
Click Setting on the welcome page.
The following dialog appears.
2
Enter the user name and password for
Administrator, then click OK.
The user name "admin" and the password "admin"
are set at the factory for the Administrator. You can
change them on the User setting menu in the
Advanced mode menu (see page 44).
The Advanced mode menu appears.

About Viewers

You can use the following viewer according to the Video
mode setting in the camera setting menu on the
Advanced mode menu (page 34).
16
Logging in to Homepage — Welcome Page
ActiveX viewer
This viewer can monitor the image in both video modes
MPEG4 and JPEG.
You have to install it when you access to the main viewer
at the first time.
When you are going to display the main viewer
of the camera for the first time
When you log in the network camera using ActiveX
viewer for the first time (clicking Enter to enter the
main viewer), the Security Warning appears. Click Yes
and install ActiveX Control. You can use all the
functions of the viewer by using ActiveX Control.
Java applet viewer
You can select this viewer when the camera video mode
is set to JPEG. The frame rate is lower than the ActiveX
viewer.
The Java applet viewer operates only when Java is
installed and Java (Sun) is enabled. If it does not
operated correctly, check if the specified Java version
has been installed successfully and Java (Sun) is
enabled.
To check the Java version
Select Tool from the menu bar of Internet Explorer, then
select Internet Option and the Advanced mode tab in
sequence, and check the version of Java displayed in
Java (Sun) is one of the versions specified below. If the
item Java (Sun) is not displayed, Java is not installed.
You need to install Java.
Java Plug-in Ver. 1.4.2_01, Ver. 1.4.2_02, Ver. 1.4.2_03,
Ver. 1.4.2_04
To enable Java Plug-in
Check "Use Java2v1.4.2_xx for <applet> (requires
restart)" in "Java (Sun)".
To install Java Plug-in
Download Java 2 Runtime Environment, Standard
Edition (JRE) from the homepage of Sun Microsystems,
Inc., and install it following the instructions on the
installer.
Notes
• If Automatic configuration is enabled in the Local
Area Network (LAN) Settings on Internet Explorer,
the image may not be displayed. In this case, disable
Automatic configuration and set the Proxy server
manually. For setting the Proxy server, consult your
network administrator.
• When you install ActiveX viewer on Windows 2000
or Windows XP, you should have logged in the
computer as the Administrator.